iStock_Large Gutter Cleaning


We all recognise the importance of having a ‘roof over our heads’ and yet we often neglect our roof and gutters until it is too late. Inspecting and maintaining your roof, gutters and downpipes should be carried out at least every six months. We recommend at the end of autumn and spring. In some locations where there are overhanging trees or where the premises are close to the ocean more frequent maintenance may be required. In addition, check your roof, gutters and downpipes during and after storms. Deterioration to roofs and gutters can suddenly be accelerated by storms and high winds.

Overflowing gutters indicate that there is a serious problem with your water management system. Gutters that have a build-up of debris with leaf matter, dirt and organic growth will lose a large amount of their water carrying capacity causing them to overflow. Overflowing gutters can lead to flooded ceilings, damaged roof timbers, saturation of the internal walls and damage to the buildings foundations, which can result in some serious structural damage. Valley lines are also prone to trapping leaves, causing water to divert and overflow onto the ceilings below. Often this results in not only damaging the ceiling and some of your possessions below, but also insulation, light fittings and electrical wiring.

INSPECTING YOUR ROOF – Where possible carry out a visual inspection of the roof from ground level (binoculars are useful). This may be sufficient if there is no evidence of problems from inside the building or the roof space. Inspect the roof for any loose metal sheeting, clogged, bent or broken gutters and downpipes. Check for damaged or lifting capping’s and flashings, paying particular attention around chimneys, parapet walls, pipe penetrations, air-conditioners and sky-lights. Look for signs of corrosion at the joins between the sheets and also along the screw line.

Not all roof problems can be rectified without the services of a roofing professional, however gutter and downpipe maintenance, when approached in a sensible manner can be fixed within a few hours. Safety should be the primary concern when deciding whether to do this yourself or engage someone else.

SAFETY FIRST – Many problems can only be identified by getting up on the roof and any work you do around your premises with a ladder requires care. Use a sturdy, standalone ladder placed on a level surface. Carry out an inspection as outlined above. In addition, check the gutters and downpipes for a build-up of debris and leaf matter. Wear thick gloves and protective eyewear to avoid cuts to hands and swarf entering your eyes.

MAINTENANCE PROCEDURE – Using a safe and stable ladder, wearing appropriate thick PVC gloves and protective eyewear, clean and remove the build-up of leaf matter, dirt and debris from the gutters. Use a stiff, soft bristled brush to sweep debris into a pile, being particularly careful not to scratch or damage the metal gutters. Place the debris into a bucket or plastic bag and lower to the ground. With a garden hose wash down and remove all sludge and decaying leaf matter. Check that the gutters are draining freely towards the downpipes or outlets and that they do not hold any water as this will accelerate rusting of the steel or iron gutters and considerably shorten their life.

Downpipes should be cleared of any debris by inserting a water pressure hose down (from the top) each downpipe. Clearing of obstructions should immediately remove the risk of water backing up in the gutters. Underground storm water systems may require a plumber to unblock any obstructions.

CONSIDER A PERMANENT SOLUTION – Reduce the amount of time you spend removing debris and cleaning your gutters by installing Rev Guard Gutter Guard system. Rev Guard Gutter Guard acts like a permanent barrier to foliage and other debris, giving you year round protection from the risk of blocked gutters and downpipes. It is made from 100 per cent BlueScope ZINCALUME® steel, created in a custom made profile which is then perforated and cut to lengths of up to 8 metres and folded to suit any application.

If your gutters and downpipes have been cleared and cleaned and there are signs of leaks then it is likely that your gutters and downpipes require replacement. Our representatives can help identify the problem. Call Hindmarsh Roofing for more information or an obligation free quote on 08 8268 1600.




COLORBOND® and ZINCALUME® are both iconic brands that have become household names in Australia. Whilst there are many different kinds of metal roofing options, COLORBOND® Steel and ZINCALUME® Steel are the most commonly used in Australia.

For over 45 years COLORBOND® Steel has evolved into one of the worlds most advanced building materials.

Today, according to research carried out by BlueScope Steel, nearly half of all new homes in Australia have roofs made from COLORBOND® Steel, 9 out of 10 new homes built in Australia feature products made from COLORBOND® Steel and over 80 per cent of all Australian gutters and fascia’s are made from COLORBOND® Steel.

COLORBOND® Steel has become Australia’s single most popular roofing brand.


ENERGY EFFICIENCY – Using thermally efficient roofing materials like COLORBOND® Steel can help reduce your cooling costs by up to 20 per cent. Combining COLORBOND® Steel with Thermatech® technology and insulation will help your building remain comfortable all year round. In summer, air-conditioners have an easier job keeping your building cool, thereby saving money on energy costs as well as reducing emissions from electricity generation. In winter, the same metal roof, properly insulated will help keep the heat inside. The choice of colour can also influence thermal performance. Lighter colours, in particular, radiate less heat during summer.

ECO–FRIENDLY – Metal roofing is considered a green material because it is recyclable, reusable, sustainable and practically maintenance free. Steel is 100% recyclable and is one of the world’s most reused materials. It is durable and lightweight making it more efficient and cost effective to transport. Sheets are pre-cut to required lengths so there is less wastage, thereby reducing the impact on the job site and its surroundings.

LONGEVITY – Iron roofing is made to withstand harsh conditions of a dry sunburnt state like South Australia. 45 years of research and development in Australia alone, under some of the toughest conditions our country has to offer, has proven for many years just how durable metal roofing can be. COLORBOND® and ZINCALUME® regularly outlast the range of BlueScope Steel manufacturer’s warranties (up to 30 years) that are offered for a variety of applications.

VERSATILITY – Metal roofs come in a wide variety of colours, profiles, textures, finishes and styles. From basic to intricate, metal roofing can be shaped to your needs. It suits both heritage and modern style homes and is the only option available for flat or low pitch roofs. There is also the appeal of being able to co-ordinate your home, the COLORBOND® range is available for wall cladding, fencing, downpipes, fascia’s, garage doors and even cubby houses and dog kennels, providing an aesthetically pleasing environment around your residence.

SECURITY & PEACE OF MIND – Metal roofing is very secure, someone attempting to enter the home cannot just lift a sheet of iron like removing a tile, to break in through metal roofing is a noisy, time consuming process. Metal roofing is generally installed in continuous lengths, made to order sheets, removing many joins and possible entry points for water to leak into your home. As well as looking visually appealing metal roofing is extremely strong, resisting strong winds and hail and providing a barrier from falling branches and debris. In addition, metal roofing is non-combustible, termite resistant and low maintenance.

We all know that weather can be unpredictable and with the extreme Australian conditions like torrential rain, hail storms, gusty winds and bush fires affecting homes right across the country, more and more homeowners are seeking the protection of a metal roof.


COLORBOND® Steel and ZINCALUME® Steel are some of the toughest, most advanced building materials in the world. With its baked on finish, COLORBOND® has been tried and tested for over 45 years in some of the harshest climates across Australia, so you can rest assured that COLORBOND® Steel not only looks beautiful, it is durable and has outstanding thermal properties.

Offering some of the best warranties in today’s market, BlueScope Steel offers a warranty against corrosion to perforation by weathering in the natural elements for a period of up to 30 years for COLORBOND® Steel and ZINCALUME® Steel from the date of installation. BlueScope Steel also warrants that the paint system on COLORBOND® Steel will not flake or peel due to natural weathering for a period of up to 20 years from the date of installation.


Hindmarsh Roofing has all your solutions for Metal Roofing, Cladding and Rainwater Products in the domestic, commercial and industrial sectors covered.

Established in 1979, Hindmarsh Roofing’s team of qualified roof plumbers, supervisors, estimators and office staff have extensive knowledge and can offer expertise in material selection, design ideas and water drainage. We have the flexibility and skills to work on any size project, regardless of its complexity or design.

If you are considering a Metal Roof, the South Australian roofing team here at Hindmarsh Roofing are happy to discuss your needs and talk to you at length about your project and budget. Give us a call today on 08 8268 1600 or fill out our online contact form and one of our team members will contact you as soon as possible.